Continuous, survey-on-the-fly technology

The Champ Pilot™ is a continuous non-north seeking solid state gyro system that allows users to rapidly survey drill-holes with precision.

Requiring no surface setup procedures it’s tough, reliable and ready to survey within minutes.

The Champ Pilot’s unique continuous mode of operation allows users greater flexibility to survey a wider range of drill-hole’s with precision.

Run the Champ Pilot™ on wire line or on rods to conduct a survey. Depth stations can be assigned “on the fly” or whilst stationary.

With a robust solid state design, the Champ Pilot™ is capable of performing a pump in or drop out-run survey as the drill rods are pulled at bit change or at end of hole, reducing rig standby time associated with a conventional survey.

Housed in 36mm running gear the Champ Pilot™ measures 1.64 meters long and weighs less than 7kg. Battery modules have a 15 hour life and with two supplied as standard you will never run short on power.

  • Memory Solid State
  • Power Up & Run
  • Continuous Operation
  • Tough, Rugged & Reliable
  • Survey on Cable or on Rods
  • Drop or Pump in for Out-run Survey
  • Azimuth : +/- 0.5°
  • Inclination : +/- 0.15°
  • Gravity High Side : +/- 0.2°
  • Gyro Toolface : +/- 0.75°
Surface Setup
  • Warm up Time : 45 sec
Downhole Travel
  • Max Angular Rate : 15° per second rotation
  • Velocity : 1m / sec
  • Re-chargeable Li-ion, 5000mAh or standard c-cell
  • 15 hours continuous operation
  • Two battery modules supplied
Temperature, Shock & Pressure Rating
  • Temperature : -10°c to +70°c
  • Shock : 1000g Axial, ½ sine , 1ms
  • Pressure Rating : 4000 psi
Dimensions & Weight
  • Downhole Probe in Running Gear
  • Outside Diameter : 36mm
  • Length : 1640 mm
  • Weight : 7 Kg
Measurements & Communication
  • High speed wireless communication
  • Continuous data acquisition at 1m/sec